Setting of hinged swivel-type pump
The hinged pump unit can be moved to three positions, to suit specific workpiece and application.
If the pump is turned 90 degrees, it is then possible to insert longer items from the side.
Turn the pump by pulling on the spring-loaded lock
(Fig. 14) and pulling the pump into the required
position.
Lock the pump in one of the three positions (Fig. 15).
Fig. 15
Normal position
(EN)
EP100D G7 XXX (EN)_Midlertidig_SN.docx
Turned 45 degrees
19/31
Knowhow is the difference
Fig. 14
Turned 90 degrees
2019-09-18 SN