Huawei UPS5000-E-180 kVA User Manual page 51

UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules)
Figure 2-16 Appearance (6-pin COM1 port)
No. Silk Screen
1 B_TEMP
2 COM1
3 COM2
4 FE
5 RS485
Issue 05 (2024-01-30)
Name
Battery
temperature
sensor port
Southbound
communications
port 1
Southbound
communications
port 2
Network port
Northbound
communications
port
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
Connects to an indoor battery temperature sensor.
● Supported protocol: Modbus-RTU
● The SmartLi can be connected.
● Supported protocols: Modbus-RTU and CAN
● Connects to a southbound device (AC detection
board) in the cabinet. The port is in use.
● Connects to the WebUI over HTTPS, the
ECC800-Pro or NetEco over Modbus-TCP, or a
third-party network management device over
Modbus-TCP or SNMP; supports networking
over SNMP.
● Supported protocols: Modbus-TCP, HTTPS, and
SNMP
● Connects to a third-party network management
device over two wires.
● Supported protocol: Modbus-RTU
2 Product Overview
43