urmet domus iPercom MIKRA2 1060 Installation And Configuration Manual page 46

Press "Activate/Verify Call Forwarding Service".
On the smartphone where the CallMe App is installed press the button: "Settings" → "Service Management" → "My Devices" → "Add".
The QR Code reader application on your smartphone is launched. Use your smartphone to scan the QR code displayed on the video door phone.
Press the "Yes" button to activate the call forwarding function on the smartphone.
On the video door phone, press the "Activate and verify" button to activate the function.
If successful, a screen confirming the activation of the function is displayed.
If unsuccessful, a screen indicating the function activation failure is displayed. Carry out the procedure again, making sure that you are carrying out the steps
described correctly (for more information scan the following QR Code with a smartphone or tablet and download the Ipercom system technical manual
ver. 2.1.0. Refer to the chapter "Call forwarding setting").
ATTENTION! To receive call forwarding on multiple smartphones, refer to Appendix N of the Ipercom system technical manual.
46
Figura 44: CallMe service activation
My devices
Do you want to activate call
forwarding service?
Figura 45: App CallMe
Figure 46: QR Code for the Ipercom system technical manual
Yes
Add
DS1060-179