Creating The Configuration - urmet domus iPercom MIKRA2 1060 Installation And Configuration Manual

Entering the password and pressing the CONFIRM button allows access to the configuration mode.
The first page that appears is the one for selecting the current date and time, a fundamental step for correctly configuring the system.
Figure 5: Setting the date and time
By entering data into the year, month, day, hour, and minute columns and then pressing the CONFIRM button, the system acquires the correct date and
time.
At this point, the configuration menu will appear, where it is possible to create the first system configuration.
Figure 6: Configuration Menu
6.4

CREATING THE CONFIGURATION

To create the first system configuration, select the item "System Configuration" from the menu and then "Create configuration", as show in the figure
below.
Figure 7: Step-by-step creation
32
DS1060-179