urmet domus iPercom MIKRA2 1060 Installation And Configuration Manual page 37

Kit ip e ipercom 7” basic, kit ip with and basic 7” ipercom

Hide thumbs Also See for iPercom MIKRA2 1060:

Table of Contents

Available languages

Assign a name to the device using the Name field, then press the

illustrated in the figure below.

Press the Scan button to identify the Door Unit installed: a new window will appear specifying the device found.

Select the element visualized and press the OK button: the MAC Address field will be automatically filled in.

The "Door Used" option allows you to enable / disable the management of the pedestrian entrance, by default the option is set to YES.

The "Gate Used" option, on the other hand, allows you to enable / disable the management of the driveway, by default the option is set to NO.

DS1060-179

button in correspondence or the MAC Address: a new window will appear, as

Figure 20: Selecting the MAC address

Figure 21: Selecting the Door Unit identified

Figure 22: Completing the Door Unit Setting 1

Table of Contents

Chapters

Table of Contents

Do you have a question about the iPercom MIKRA2 1060 and is the answer not in the manual?

Ipercom mikra2 1060/634