Summary of Contents for urmet domus Mininote+ 1722/85
Page 1
All manuals and user guides at all-guides.com Mod. 1722 DS1722-090 LBT20157 ONE- AND TWO-HOUSEHOLD COLOUR HANDS-FREE VIDEO DOOR PHONE KIT Ref. 1722/85 - 1722/86 HOME AUTOMATION SECTION INSTALLATION MANUAL...
All manuals and user guides at all-guides.com 1 CONFIGURATION The end user will be able to use up to a maximum of 12 virtual buttons to control individual outputs or scenarios: These buttons are divided in 2 groups: the first 8 (Yokis buttons) and the last 4 (Composite buttons).
All manuals and user guides at all-guides.com 1.1 BUTTONS CONFIGURATION There are three possible modes. Installers can choose the one most suited to their requirements. A) Yokis Buttons Direct Configuration The (virtual) Yokis Buttons can be entirely configured directly via the monitor. The advantage consists in a more user-friendly configuration via a wizard-type interface: the monitor automatically manages the necessary pulses for Yokis button configuration.
All manuals and user guides at all-guides.com 1.1.1 Yokis Buttons Direct Configuration Each Yokis Button can be configured to control one or more activation modules (Scenario or Centralisation Scenario), either in Direct Mode or in Radio Bus Mode. Please refer to the Yokis 'Radio Quick Installation Guide’ for more information on the available options.
Page 6
All manuals and user guides at all-guides.com Before describing the individual controls in detail, we would like to provide some general indications. First of all, by tapping in the bottom right corner of Yokis settings, a QR code is displayed: The QR code can be used to access the configuration guide for help.
Page 7
All manuals and user guides at all-guides.com It is always possible to go back to a higher level menu by pressing the 'OK' or ‘BACK’ button. Similarly, with a Yokis Remote control, a ‘Reset’ to initial settings for a specific button (and for that button only) can always be controlled.
Page 8
All manuals and user guides at all-guides.com To do this, use the ‘Delete Unused Connections’ item, available from the higher-level menu reachable through the icon Delete Unused Connections If the button controls a single receiver, this option can be useful if that receiver is replaced. First, connect the new receiver with Connect (or disconnect) (see above).
Page 9
All manuals and user guides at all-guides.com By tapping it you can choose one of three options: Lights M 10 or Shutters M 11 Lighting/Shutters M 20 For more information, refer to the Yokis 'Radio Quick Installation Guide’, in section ‘F – Centralised control on Radio Bus’.
Page 10
All manuals and user guides at all-guides.com Reference should be made to section ‘G – Pushbutton functions’ of the Yokis 'Radio Quick Installation Guide’. This option can only be used if a Button had been 'connected' to a single receiver module. In this case, it is then possible to configure the receiver with specific sequences of pulses.
All manuals and user guides at all-guides.com 1.1.2 Yokis Buttons Configuration via remote control 1) Using a TLC8CP 8-Buttons remote control, configure the buttons of the remote control itself. Refer to the Yokis 'Radio Quick Installation Guide’ for more information. 2) Check that all configured buttons are working efficiently.
Page 12
All manuals and user guides at all-guides.com A Wizard will start to guide the installer through the importing procedure: follow the Wizard instructions. At the end of the import the following operations should be performed for each button: Define its NAME. Test the imported Button efficient operation.
All manuals and user guides at all-guides.com After resetting the Button, the icons allowing button Configuration will once again be displayed at bottom of the screen. Then refer to Section ‘Yokis Buttons Direct Configuration’. 1.1.3 Yokis Buttons Mixed Configuration Carry out the following three steps: Using a TLC8CP 8-Button remote control, 'connect' the buttons to the receivers.
Page 14
All manuals and user guides at all-guides.com WARNING: It is obviously no use to configure a Composite button, unless at least 2 Yokis Buttons have already been configured. From the monitor Home Page, press the icon ‘Settings’ and then select ‘Yokis’ You will obtain access to the following page: The Composite buttons are the last bottom 4.
All manuals and user guides at all-guides.com Having done this, tap the icon : the following screen will be displayed: BACK X Specify which Yokis Buttons are included in this Composite Button. Clearly, it is important to choose at least 2 to obtain any active effect. Confirm with ‘OK’.
Page 16
All manuals and user guides at all-guides.com To do this, from the monitor Home Page, press the icon ‘Settings’ and then select ‘Yokis’ You will obtain access to the following page: Tap the icon . You will then be directed to the page where the associated button can be defined.
All manuals and user guides at all-guides.com 1.1.6 Other Functions 3 more functions are accessible from the same menu. From the monitor Home Page, press the icon ‘Settings’ and then select ‘Yokis’ You will obtain access to the following page: Tap the icon , located at the bottom.
All manuals and user guides at all-guides.com 1.1.6.1 Exporting Yokis Buttons to a remote control Choose the second Menu item: ‘Export Yokis Buttons to Remote’. Tap ‘Do it’. A Wizard will start to guide the installer through the exporting procedure: follow the Wizard instructions.
Page 19
All manuals and user guides at all-guides.com DS1722-090 LBT20157...
Page 20
All manuals and user guides at all-guides.com DS1722-090 LBT20157 Service technique URMET S.p.A. 10154 TURIN (ITALIE) service clients +39 011.23.39.810 http://www.urmet.com VIA BOLOGNA 188/C e-mail: info@urmet.com Telef. +39 011.24.00.000 (RIC.AUT.) DS1722-090 LBT20157 +39 011.24.00.300 - 323...