6.8 CALL FORWARD SETTING ON SMARTPHONE / TABLET
The call forwarding function can be used to send an audio-video or an audio-only call to an Android or iOS smartphone.
IMPORTANT! The smartphone/tablet must have Google Service to be able to download and use the Urmet CallMe app.
To use the call sending (or forwarding) on a smartphone/tablet, it is necessary to:
1.
Enable the function in the system configuration;
2.
Download the CallMe app and install it on your personal smartphone;
3.
Create an Urmet Cloud account on the CallMe app;
4.
Configure the video door phone application on the monitor for the remote account connection.
Concerning the first point, the default configuration sets the call forwarding to be enabled, so it is not necessary to modify any settings.
The CallMe app (version higher than 4.0) is available at both Google Play Store for Android devices and at the Apple App Store for devices with
iOS.
Once the app is downloaded and started, a page like the one below will appear.
Start the application taking care to:
•
enable reception of notifications (essential for receiving calls);
•
disable applications that optimise battery usage or power saving functions on the smartphone because they may affect operation of the Urmet CallMe
app when the screen is off (running in the background).
•
allow the CallMe App to:
– access photos, media, and files on your device;
– record audio;
– take pictures and record videos;
– make and manage phone calls.
IMPORTANT: If you do not provide consent for all four functions listed above, you will not be able to use the CallMe app.
•
make sure that there are no antivirus applications which may affect the operation of the Urmet CallME application on your smartphone.
•
make sure that the data contract you use on your smartphone does not block VoIP streams.
Wait for the following screen to open:
Immediately after, the "Create or Set Account" page will be displayed.
DS1060-179
Figure 37: CallMe app home page
Figure 38: Create a new account or use a saved account
43
Need help?
Do you have a question about the iPercom MIKRA2 1060 and is the answer not in the manual?
Questions and answers