Ensuring System Security - urmet domus iPercom MIKRA2 1060 Installation And Configuration Manual

6.6 ENSURING SYSTEM SECURITY

Once distribution of the configuration is completed, the system must be protected with an administrator password: under these conditions the system will
define itself blocked.
To carry out this operation, the status window that was opened previously closes, then select Password Management from the window, as illustrated in
the figure below.
Figure 29: Password management
In the sub-menu that opens, select the item Lock System, as illustrated in the figure.
Figure 30: Locking the system
In the window that appears on the screen, set the password to lock the system
Figure 31: Setting the password to lock the system
40
DS1060-179