Wifi Configuration - Goodwe ET Series User Manual

3. CONNECTION
3.1 WI-FI CONFIGURATION
This part shows the configuration using a web page.
Wi-Fi configuration is necessary for online monitoring and maintenance.
Preparation:
1. We switch the inverter on only to PV.
2. A router with internet access to the website www.semsportal.com is required.
Step 1
1. Connect to Solar-Wi-Fi* via your PC or smart
phone (* its name is the last 8 characters of
the inverter's serial number);
2. Open your browser and login to
10.10.100.253 or 10.10.100.254¨
Admin (U): admin | Password: admin
3. Then click on the "OK" button.
Step 2
1.
Click on the "Start Setup" button to select the
router (home WiFi). Then click the "Next"
button.
NOTE:
1. Please make sure the password and encryption method/algorithm are the same as those of the router.
2. If everything goes well, the Wi-Fi LED on the inverter will change from a double blink to 4 blinks and
then to a solid status, which means that the Wi-Fi has successfully connected to the server.
3. Wi-Fi configuration can also be done on the PV Master App. For details, please check the PV Master
App.
Step 3
1. Fill in the router password and click "Next".
2. Click on the "Finish" button.