Installing The Wifi Module (Optional); Connecting The Antenna(Optional) - Goodwe MS Series User Manual

06 Electrical Connection
The inverter supports being connected to the smart phone or web pages via Ezlink and WiFi
module to set relative parameters, thus to check the inverter's running information, fault
information and observe system status in time.

6.5.3 Installing the WiFi Module (optional)

Refer to the delivered WiFi module user manual to get more introduction to the module. For
more detailed information, visit https://en.goodwe.com.

6.5.4 Connecting the antenna(optional)

• When an Ezlink is used for device communication, an antenna needs to be installed.
• The 4G, WiFi, and bluetooth antenna are connected in the same way. The following
illustration shows an example of installing the 4G antenna.
NOTICE
NOTICE
28
User Manual V1.0-2022-08-20