Goodwe ET Series User Manual page 9

2.3.2 MOUNTING
REMEMBER THE INVERTER IS HEAVY! BE CAREFUL WHEN REMOVING IT FROM THE BOX.[2]
The inverter is suitable for mounting on concrete or other non-combustible surfaces only.
Step 1
- Please use the mounting bracket as a template to drill 6 holes in the correct
positions (10mm in diameter and 80mm in depth). (picture 4)
- Use the expansion bolts in the accessory box and tightly attach the mounting
bracket to the wall.
Note: The load capacity of the wall must be greater than 25kg. Otherwise, the wall
may not be able to prevent the inverter from dropping.
Step 2
Grasp the inverter on both sides of the cooler and place the inverter
on the wall bracket. (picture 5).
NOTE: Make sure the inverter is properly seated on the wall
bracket.
Step 3
Attach the grounding wire to the grounding point of the inverter.
Step 4
The inverter can be locked. (the lock is not part of the package).
Wall holder
Dowel
Screw