Dmap Channels - Ametek DN VR-608 Series User Manual

Table 5-3 DMap Channels
Channel
DQ_VR608_CHNLTYPE_CRR
DQ_VR608_CHNLTYPE_CR
DQ_VR608_CHNLTYPE_CRH
DQ_VR608_CHNLTYPE_CRL
DQ_VR608_CHNLTYPE_TSTAMP
DQ_VR608_CHNLTYPE_STATUS
DQ_VR608_CHNLTYPE_AINSTS
DQ_VR608_CHNLTYPE_ALARMSTS
© Copyright 2024
United Electronic Industries, Inc.
Refer to SampleRTDMap608 for an example of how to set up a Data Map and
read data from DNx-VR-608 input channels. The available DNx-VR-608 data
channels are shown in Table 5-3.
Raw counter/timer data for a VR input channel.
DqAdv608Read()
See
for a description of the raw data returned in each input mode.
Table 2-2 in this document also describes Count Register Data for
each mode.
Time stamp in 10 µs increments
reserved
Edge detection status for a channel pair.
DqAdv608ReadADCStatus()
See
register bits (
Status of all open circuit, stalled rotation, and overspeed alarms.
Bits are defined as:
31-30
29
28
27
26
25
24
23-22
21
20
19
18
17
16
15-14
13
12
11
10
9
8
7-6
5
4
3
2
1
0
February 2024
DNx-VR-608 Variable Reluctance Interface
Programming with the Low-level API
Description
in the "PowerDNA API Reference Manual"
for a description of the status
DQ_VR608_ADC_STS.status
RSV - Reserved
OSPD7 - overspeed detected on sensor 7
OSPD6 - overspeed detected on sensor 6
OPEN7 - Sensor 7 detected as open
OPEN6 - Sensor 6 detected as open
STAL7 - Stall detected on sensor 7
STAL6 - Stall detected on sensor 6
RSV - Reserved
OSPD5 - overspeed detected on sensor 5
OSPD4 - overspeed detected on sensor 4
OPEN5 - Sensor 5 detected as open
OPEN4 - Sensor 4 detected as open
STAL5 - Stall detected on sensor 5
STAL4 - Stall detected on sensor 4
RSV - Reserved
OSPD3 - overspeed detected on sensor 3
OSPD2 - overspeed detected on sensor 2
OPEN3 - Sensor 3 detected as open
OPEN2 - Sensor 2 detected as open
STAL3 - Stall detected on sensor 3
STAL2 - Stall detected on sensor 2
RSV - Reserved
OSPD1 - overspeed detected on sensor 1
OSPD0 - overspeed detected on sensor 0
OPEN1 - Sensor 1 detected as open
OPEN0 - Sensor 0 detected as open
STAL1 - Stall detected on sensor 1
STAL0 - Stall detected on sensor 0
Chapter 5 53
).
www.ueidaq.com
508.921.4600