Table of Contents
Advertisement
2.4
Indicators
and
Connectors
2.5
DNA Cube
Jumpers
© Copyright 2024
United Electronic Industries, Inc.
Figure 2-9 shows the locations of the LEDs and connectors on the
DNx-VR-608. The LED indicators are described in Table 2-3.
RDY LED
STS LED
DB-37 (female)
37-pin I/O connector
Figure 2-9 Photo of DNR-VR-608 Board
Table 2-3 DNx-VR-608 LED Indicators
LED Name
RDY
Board is powered up and operational
STATUS:
OFF: Configuration mode (e.g., configuring channels, running in
STS
Point-by-Point mode)
ON: Operation mode (e.g., running in DMap)
The DNA-VR-608 jumper location to be used with the "PowerDNA Field
Installation Guide" is shown in Figure 2-10:
Figure 2-10 DNA-VR-608 Jumper Address Location
February 2024
DNx-VR-608 Variable Reluctance Interface
Functional Description
Description
Chapter 2
22
DNR bus
connector
www.ueidaq.com
508.921.4600
Advertisement
Table of Contents
