The Kitchen Timer; Powerboost Function; Activation; Deactivation - Siemens HL9S7Y3 0U Series Instruction Manual

Free standing cooker
Table of Contents

Advertisement

PowerBoost function

en
Notes
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
You can set a cooking time of up to 99 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Programming
Press the
symbol several times until the
0
1.
indicator lights up.
‹‹
function display.
Select the desired time in the programming panel.
2.
The timer starts to count down after a few seconds.
Changing or cancelling the time
Press the
0
symbol several times until the
lights up. Change the time with the programming zone,
or set to
‹‹
.
Once the time has elapsed
A warning signal sounds. In the time program function
display
is shown, and the
‹‹
After 10 seconds the indicators turn off.
When the
symbol is pressed, the indicators turn off
0
and the beeping stops.
24
W
lights up in the time program
W
indicator
indicator lights up.
W
vPowerBoost function
T he PowerBoost function enables you to heat up large
P o w e r B o o s t f u n c t i o n
quantities of water faster than when using heat
setting
.
Š
The function can be used by any hotplate provided that
no other hotplates are switched on. Otherwise
will flash in the heat setting display.

Activation

Select a hotplate.
1.
Touch the
symbol.
&
2.
lights up on the display.
The function is activated.
If a hotplate is switched on while the PowerBoost
Note:
function is active,
and
display; heat setting
will then be applied
Š
automatically. The PowerBoost function will now be
deactivated.

Deactivation

Select the hotplate.
1.
Touch the
symbol.
&
2.
The
display goes out and the hotplate switches
back to the
Š
heat setting.
The function is deactivated.
In certain circumstances, the PowerBoost
Note:
function can switch itself off automatically in order to
protect the electronic elements inside the hob.
will flash on the heat setting
Š
and
Š

Advertisement

Table of Contents
loading

Table of Contents