Time-Setting Options; Programming The Cooking Time; The Kitchen Timer - Siemens HL9R4T05 U Series Instruction Manual

OTime-setting options
Y our hob has two timer functions:
T i m e - s e t t i n g o p t i o n s

Programming the cooking time

■
Kitchen timer
■
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
Select the hotplate and the required heat setting.
1.
Touch the 0 symbol.
2.
the hotplate. appears in the timer display.
‹‹
Touch the or symbol. The basic setting
@ A
3.
appears:
symbol: 30 minutes.
@
symbol: 10 minutes.
A
Use the or symbol to select the required
@ A
4.
cooking time.
After a few seconds, the time begins to elapse.
The same cooking time can be set automatically
Note:
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Changing or deleting the time
Select a hotplate. Touch the
or symbols to change the cooking time, or set the
@ A
time to .
‹‹
Once the time has elapsed
The hotplate switches off. A beep sounds and in the
time program function display
10 seconds. The indicator on the hotplate lights up.
Ú
Pressing the symbol turns off the indicators and
0
stops the beeping.
Notes
If a cooking time was programmed for several
■
hotplates, the time information for the selected
hotplate is shown in the timer display.
You can set a cooking time of up to 99 minutes.
■
Ú lights up in the display for
symbol and use the
0
appears for
‹‹

The kitchen timer

You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
The kitchen timer can be set in two different ways:
1.
– If a hotplate has been selected, touch the
0 symbol twice.
– If no hotplate is selected, touch the
The display beside the
Ú
appears in the timer display.
Touch the or symbol. The basic setting
@ A
2.
appears.
@ symbol: 10 minutes.
symbol: 5 minutes.
A
Use the or symbol to set the required time.
@ A
3.
After a few seconds, the time begins to count down.
Changing or deleting the time
Touch the symbol repeatedly until the
0
lights up beside the
V
to ‹‹ using the @ or A
Once the time has elapsed
A warning signal sounds.
program function display. After 10 seconds the
indicators turn off.
Pressing the symbol turns off the indicators and
0
stops the beeping.

Time-setting options

symbol.
0
symbol lights up.
V
indicator
Ú
symbol. Change or set the time
symbol.
is displayed on the time
‹‹
en
‹‹
21