Table of Contents
Advertisement
Programming the oven
There are different ways to programme the oven. Programming
the type of heating, temperature or grill power. The oven can be
programmed with the cooking time (duration) and the end time
for each dish. For more information, see the chapter Setting the
time functions.
Note: We recommend preheating the oven before inserting the
food in order to avoid condensation on the oven glass.
Type of heating and temperature
Example in the picture:
%
The function selector is used to set the type of heating.
1.
Set the temperature or grill setting using the temperature
2.
selector.
Setting the time-setting options
Your oven has various time-setting options. You can use the
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The
N
arrow shows you the time-setting option that is
active. A time-setting option that has already been set can be
changed direction with the
next to the relevant time symbol.
Timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
Press the
button once.
0
1.
The time symbols light up in the display and the
next to
.
V
Use the
@
or
A
button to set the timer duration.
2.
Default value for
button = 10 minutes
@
Default value for
A
button = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The
symbol lights up in the display and the timer
NV
duration counts down. The other time symbols go out.
12
Top/bottom heating at 190 °C.
@
or
A
button when the
N
N
The oven begins to heat up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Rapid heating
With the rapid heating function, the oven reaches the
programmed temperature very quickly.
Rapid heating must be used for temperatures of more than
100 ºC. The following types of heating are appropriate:
3D hot air
■
Top and bottom heating
■
To ensure uniform cooking, the food must not be put into the
oven until rapid heating has been completed.
Select the temperature and type of heating required.
1.
Briefly press the
2.
The display panel shows the
heat up.
End of rapid heating
A beep will sound. The
panel. Put the food in the oven.
Cancelling rapid heating
Briefly press the
display panel.
0
The timer duration has elapsed
A signal sounds. 0:00 is shown in the display. Use the
button to switch off the timer.
Changing the timer duration
arrow is
Use the
or
@
seconds, the change is adopted.
Cancelling the timer duration
Use the
button to reset the timer duration to 0:00. The
A
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
arrow is
If several time-setting options are set, the relevant symbols are
illuminated on the display. The time-setting options symbol is in
the foreground and preceded by the
To call up the
clock, press the
to the relevant symbol. The display shows the value for a few
seconds.
:
%
h
button.
symbol. The oven will begin to
c
symbol disappears from the display
c
h
button. The
c
symbol disappears from the
button to change the timer duration. After a few
A
N
timer,
cooking time,
V
x
button repeatedly until the
0
0
arrow.
end time or
y
0
arrow is next
N
Advertisement
Table of Contents
