Table of Contents
Advertisement
Activation
Select one of the two hotplates assigned to the
1.
Move function.
Touch the
ú
symbol. The
2.
The heat settings light up on the displays for each of
the two hotplates.
The function has now been activated.
Notes
The display for the hotplate with the cookware lights
■
up more brightly.
The
¬
indicator lights up on the display for the
■
hotplate that is still selected.
Changing the heat setting
Select one of the two hotplates which are included in
the move function and change the heat setting in the
settings range.
If the function is deactivated, the heat settings
Note:
return to the preset values
Deactivation
Touch the
symbol.
ú
This deactivates the function.
When one of the two hotplates is set to
Note:
function is deactivated within approx. 10 seconds.
ú
indicators light up.
, the
‹
OTime-setting options
Y our hob has two timer functions:
T i m e - s e t t i n g o p t i o n s
Programming the cooking time
■
Kitchen timer
■
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
Select the hotplate and the required heat setting.
1.
Touch the
0
symbol.
2.
the hotplate.
lights up on the timer display.
‹‹
Within the next 10 seconds, set the required cooking
3.
time in the settings range.
After a few seconds, the time begins to elapse.
Notes
The same cooking time can be set automatically for
■
all hotplates. The set time for each of the hotplates
counts down independently from the others.
You can find information on automatically
programming the cooking time in section ~ "Basic
settings"
If the Combi Zone or Move function is selected for
■
the combined hotplate, the set time for both
hotplates is the same.
Automatic programming
If the previous setting from 1 to 5 is pressed in the
programming zone, the cooking time is reduced by one
minute.
If the previous setting from 6 to 10 is pressed in the
programming zone, the cooking time is increased by
one minute.
Changing or cancelling the time
Select the hotplate and then press the
Change the cooking time using the programming zone
or set to
in order to cancel the time.
‹‹
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up
the display.
When the
symbol is pressed, the indications turn off
0
and the beeping stops.
Time-setting options
x
lights up on the display for
symbol.
0
for 10 seconds in
‹‹
en
23
Advertisement
Table of Contents
