Siemens HL9S7Y3 0U Series Instruction Manual page 14

Getting to know your appliance
en
The control panel
Controls
Main switch
#
Selecting a hotplate
»
0 IIIIIIIIIIII Control panel
b PowerBoost function
Combi zone function
þ
Move function
ú
Locking the control panel for cleaning
#
Childproof lock
‚
Timer function
0
Indicators
Operating status
‹
Heat settings
‚ - Š
Timer function
‹‹
Residual heat
• / œ
Cooking zones
Single cooking zone
$
Combined cooking zone
à
Only use cookware that is suitable for induction cooking; see the section entitled ~ "Induction cooking"
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display : High temperature
•
■
Display : Low temperature
œ
■
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
14
Use cookware that is a suitable size
See the section entitled ~ "CombiZone function" or ~ "Move function"
Indicators
PowerBoost function
›
Combi zone function
ø
Move function
ú
Programming the cooking time
x
Kitchen timer
V
Time display
ö
Touch controls
Touching a symbol activates the associated function.
Notes
Always keep the control panel clean and dry.
■
Moisture reduces its effectiveness.
Do not place any cookware near the indicators or
■
sensors. The electronics could overheat.
The hotplates