Table of Contents
Advertisement
Lower Wheel Replacement
1. Use a wrench to disengage the quick release cam
and lower the anvil wheel bracket until it stops.
2. Lift the anvil wheel up and off the spring pins (A).
3. Install the and anvil axle onto the spring pins and
be sure that the axle is seated into the saddle.
4. Engage the quick release lever and raise the
lower wheel to the operating position.
Rotating Wheels
The wheels can be positioned perpendicular to the
frame for long workpieces or parallel to the frame for
wide workpieces.
1. Disengage the quick release lever.
2. Lower the anvil wheel bracket.
3. Remove the lower lock handle and rotate the ram
90° until the flat index (A) is exposed.
4. Install and tighten the lower lock handle.
5. Loosen the upper lock handle and rotate the upper
wheel 90° to match the lower anvil.
6. Tighten the upper lock handle.
7. Engage the quick release lever and raise the upper
wheel to the operating position.
16
16
A
A
Advertisement
Table of Contents
