TechniSat DIGITRADIO 21 IR Instruction Manual page 65

15.4.4 Setting the time zone
To update the time via the Internet, it is important to configure the correct time zone.
> In the [System Settings] submenu, select [Time/Date] > [Set Time Zone] and
press the SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select a time zone and press the SCROLL/
SELECT knob to save the setting.
15.4.5 Summer time
For the correct display of the time via the Internet, the current summer or winter
time must be configured.
> In the [System Settings] submenu, select [Time/Date] > [Summer Time] and
press the SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select > [Summer Time] > [YES] or [NO]
and press the SCROLL/SELECT knob to save the setting.
15.4.6 Auto standby
Under this menu item you can define the time after which the DIGITRADIO 21 IR
automatically switches to standby (if it is not operated or no playback takes place).
> In the [System Settings] submenu, select [Auto Standby] and press the
SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select a time and press the SCROLL/SELECT
knob to save the setting.
15.5 Language
> In the [System Settings] submenu, select [Language] and press the SCROLL/
SELECT knob.
> Use the SCROLL/SELECT knob to select one of the available languages and
confirm the selection by pressing the SCROLL/SELECT knob.
15.6 Factory settings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations may no longer be received. In this case you can reset the device to
factory settings to delete all the saved stations and then initiate a new scan.
> In the [System settings] submenu, select [Factory setting] and press the
SCROLL/SELECT knob.
> Use the SCROLL/SELECT knob to select the [Yes] item to reset the factory
settings and press the SCROLL/SELECT knob.
DE
EN
65