TechniSat DIGITRADIO 21 IR Instruction Manual page 48

5.1 Reception with the dipole antenna
The number and quality of broadcast stations depends on the reception conditions
at the location of the radio. Excellent reception can be achieved with the dipole
antenna.
Precise alignment of the dipole antenna is often important, especially on the
outskirts of a DAB+ reception area. You can quickly find the location of the
nearest transmission tower online by visiting "www.dabplus.de".
Start the first scan at a window pointing in the direction of the transmission
mast. If the weather conditions are poor, DAB+ reception may be limited.
Do not touch the dipole antenna during station playback. This could reduce
the reception and lead to sound drop-outs.
6 Description of the DIGITRADIO 21 IR
6.1 Scope of supply
Before starting up, please check that everything has been delivered:
1 x DIGITRADIO 21 IR
1 x Mains adapter
1 x Instruction manual
1 x Mounting plate
4 x Mounting screws BA 4 x 15
6.2 Special features of the DIGITRADIO 21 IR
The DIGITRADIO 21 IR consists of a DAB+/FM receiver with the following functions:
- You can store up to 30 DAB+/FM/Internet radio stations.
- The radio can receive the following frequencies: FM 87.5-108 MHz (analogue)
and DAB+ 174.9-239.2 MHz (digital antenna).
- Internet radio receiver via WLAN.
- The device has a time and date display.
- Music playback via Bluetooth connection.
- Remote control with the TechniSat CONNECT app.
6.3 General device functionality
6.3.1 Switching on the device
> First prepare the DIGITRADIO 21 IR for operation as described in Section 5.
> Press the On/Standby button (2) on the device to turn on the DIGITRADIO
21 IR.
After switching on the device for the first time, you must first configure the
operating language and agree to the data protection stipulations. You can
then launch the initial set-up wizard.
48