TechniSat DIGITRADIO 21 IR Instruction Manual page 52

After selecting [Skip WPS], you can enter the password using the on-screen
keyboard. Then select the [OK] field. If the password entered is correct, a
connection to the network is now established. The signal bars
bar of the display indicate whether a connection exists.
> When the network configuration is complete, confirm the initial setup notice
by pressing the SCROLL/SELECT knob.
For more information on WLAN reception, see the chapter "15.3 Internet
settings" on page 62.
9 DAB+ (Digital Radio)
9.1 What is DAB+?
DAB+ is a new digital format through which crystal clear sound with no noise can
be heard. In contrast to conventional analogue radio stations, DAB+ can be used to
broadcast multiple stations on one and the same frequency. This is referred to as
an ensemble or multiplex. An ensemble is comprised of the radio station, as well as
several service components or data services which are broadcast individually by the
radio stations. For further information, please visit e.g.
www.dabplus.ch.
9.2 Switching on DAB+ radio mode
> Press the MODE button until [DAB] is shown on the display.
If DAB+ is being started for the first time, a complete station scan is
performed. After the scan is complete, the first station is played back in
alphanumeric order.
9.2.1 Performing a full scan
The automatic scan Full scan scans all DAB+ Band III stations and thereby
finds all stations being broadcast within the reception range.
After the scan is complete, the first station is played back in alphanumeric
order.
> Open the MENU > [Full scan] and press the SCROLL/SELECT knob.
> [Scanning...] appears on the display.
During the scan, a progress bar and the number of stations found are
displayed.
If no stations are found, check the dipole antenna and change the installation
location if required (Section 5.1).
52
www.dabplus.de or
in the status