TechniSat DIGITRADIO 21 IR Instruction Manual page 57

10.7.2 Overwriting/deleting a station memory slot
> Simply save a new station in a favourite memory slot as described.
When restoring the factory settings all memory slots are deleted.
11 Internet radio
The DIGITRADIO 21 IR is equipped with an Internet radio receiver. In order to receive
Internet radio stations/channels, you need an Internet connection using a connection
to a wireless network via a WLAN router. Consult Section 15.3 as to how to set up an
Internet connection.
> Press the MODE button repeatedly until [Internet Radio] appears in the
display.
If you are starting Internet radio operation for the first time without having
configured a WLAN connection during the initial installation, the Scan
Wizard appears, showing you all the WLAN stations within range. Use the
SCROLL&SELECT knob to select the WLAN network you recognise and enter
the relevant password using the displayed keyboard (skip WPS). Then select
[OK] and press the SCROLL&SELECT knob. If the password entered is correct,
a connection to the network is now established. The signal bars
status bar of the display indicate whether a connection exists. To cancel the
entry, select [ABBREC] and press the SCROLL&SELECT knob. If you make a
mistake, you can delete the last letter you entered by pressing [BKSP].
11.1 Last listened to
> Select MENU > [Last Listened To] to display a list of recently played stations.
> Use the SCROLL&SELECT knob to select a station, and play it by pressing
the SCROLL&SELECT knob again.
11.2 Station list
> Press the MENU button and select > [Station List].
Under Station List, all Internet radio stations are displayed, sub-divided into
different categories.
> Based on a category/country/genre, select a station and press the
SCROLL&SELECT knob.
in the
DE
EN
57