TechniSat DIGITRADIO 21 IR Instruction Manual page 61

Duration
> Then enter the alarm duration. Accept the input by pressing the SCROLL/
SELECT knob.
Volume
> Finally, you can set the alarm volume using the SCROLL/SELECT knob. Press
the SCROLL/SELECT knob to save the setting.
Saving
> Press the SCROLL/SELECT knob to save the alarm.
The time must be imported for the alarm to function properly. For more
details, see Section 15.4.2.
When an alarm is active, an alarm symbol appears on the display.
14.2.2 Switching off the alarm after being woken up
> Press the On/Standby button to turn off the alarm.
If you want to activate the snooze function, press the SLEEP/SNOOZE button
(8) repeatedly when an alarm is active.
15 System settings
All settings explained in this section apply equally to all sources.
> Open the menu and select > [System settings] using the SCROLL/SELECT
knob. Press the SCROLL/SELECT knob, to open the system settings.
15.1 Equaliser
To adjust the sound of the DIGITRADIO 21 IR, the equaliser is available with the
preset tuning of Flat, Classical, Rock, Pop and Jazz.
> Via MENU > [System settings] > [Equaliser] you can access the equaliser
settings.
> Select the equaliser setting you want and press the SCROLL/SELECT knob.
A * marks the current selection/setting.
15.2 Quality audio stream
Some Internet radio stations offer their radio streams in different quality levels. In this
sub-menu you can set the quality level selected by default by the DIGITRADIO 21 IR.
> Open MENU > [System Settings] > [Audio Stream Quality].
DE
EN
61