Siemens ULTRAMAT 6 Series Compact Operating Instructions page 6

Introduction
1.2 Product versions
1
2
3
4
5
6
7
8
9
10
11
Figure 1-1
These Operating Instructions also cover the rack-mounted versions of Series 6 (CALOMAT 6E and
ULTRAMAT 23) approved for operation in hazardous areas.
It is essential that you also observe the respective "Special conditions" of the certificates
referred to in the table.
These describe
• The fields of application
• The requirements for operation in hazardous areas
• Other precautionary measures which are important for operation.
The technical specifications in these Operating Instructions may be different to those in the
associated Operating Instructions for the analyzers and additional equipment under some
circumstances. The technical specifications listed in these Operating Instructions are valid in
such cases.
6
Data matrix code
CSA conformity mark (only for 120 V/60 Hz and 230 V/60 Hz)
CE conformity symbol
Name and address of manufacturer
Designation of origin
Measuring range(s)
Auxiliary power supply
Serial number
Order No. (MLFB number) of the device
Device name
Compact operating instructions (safety information)
ULTRAMAT 23 label (example)
Compact Operating Instructions, 01/2024, A5E45779144002-AB
Series 6 and ULTRAMAT 23