General Information; Special Information And Warnings; Proper Use - Siemens 7MB2531 Operating Instructions Manual

Introduction

1.6 Proper use

1.4

General information

This device left the factory in a safe and proper condition and has been tested. In order to
maintain this condition and to ensure safe operation of this product, it should only be used in the
manner described by the manufacturer. Furthermore, proper transportation, storage,
installation, operation and maintenance of the device are vital for ensuring correct and safe
operation.
This manual contains the information required for the intended use of the described product.
It is addressed to technically qualified personnel who are specially trained or who have the
relevant knowledge of automation technology (measuring and control systems).
Knowledge and technically correct implementation of the safety notes and warnings contained
in this manual are required for safe installation and commissioning, as well as for safety during
the operation and maintenance of the described product. Only qualified personnel have the
required professional knowledge for correctly interpreting the generally valid safety notes and
warnings in this manual in each specific case and to act accordingly.
This manual is an inherent part of the scope of delivery, despite the fact that it can be ordered
separately for logistic reasons.
Due to the variety of technical details, it is not possible to consider every single detail for all
versions of the described product and for every conceivable case in the set-up, operation,
maintenance and use in systems. For further information, or in the case of problems which are
not covered in enough detail in this document, please request the required information from
your local or responsible Siemens regional office.
1.5

Special information and warnings

This manual provides you with information on commissioning, installing, operating, and
maintaining the device.
Pay particular attention to all special information and warnings. Information of this type is set
apart from the rest of the text and is marked with the corresponding pictograms. This
information provides you with useful tips and helps avoid operating errors.
1.6 Proper use
Proper use within the context of this document means that the product may be used only for the
applications described in the catalog or the technical description, and only in combination with
the equipment, components and devices of other manufacturers recommended or permitted by
Siemens.
The product described in this document has been developed manufactured, tested and
documented in compliance with relevant safety standards. When the handling rules described
for the configuration, installation, proper operation and maintenance, as well at the safety
guidelines are adhered to, therefore, there is normally no risk to the health of persons or in
respect to damage to property.
This product was designed to ensure safe isolation of the primary and secondary circuits. Low
voltages that are connected must therefore also be generated with safe isolation.
10
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
Compact Operating Instructions, 09/2018, A5E45779389002-01