Led Indicator Status - Omron F3SG RE Series Quick Installation Manual

4-1. LED Indicator Status

Shown below are indication statuses of F3SG-R LED indicators of factory default.
Emitter
Location Name of Indicator
2 Operating range
3 Power
4 Lockout
Receiver
Location Name of Indicator
1 Top-beam-state
5 Internal error
6 Lockout
7 Stable-state
8 ON/OFF
9 Communication
10 Bottom-beam-state BTM
*1.The EDM indicator is illuminated when the RESET input is in the ON state regardless of the use of the EDM function.
*2.Refer to F3SG-R Series User's Manual for more information of blinking patterns.
5
Color
LONG Green Long range mode is selected
POWER Green Power is ON.
LOCKOUT Red
Color
TOP Blue The top beam is unblocked
INTERNAL Red
LOCKOUT Red
Incident light level is 170% or higher
STB Green
of ON-threshold
Green Safety output is in ON state
ON/OFF
Red Safety output is in OFF state
Synchronization between emitter
COM Green
and receiver is maintained
Blue The bottom beam is unblocked
Illuminated
Lockout state due to DIP Switch setting
error or Operating range selection setting
error
Error due to noise
- Lockout state due to error in emitter
Illuminated
Muting/Override state, or Lockout state
due to Cap error or Other sensor error *3
Lockout state due to Internal error, or
- error due to abnormal power supply or
noise
- Lockout state due to error in receiver
Safety output is instantaneously turned
OFF due to ambient light or vibration
Lockout state due to Safety Output error,
or error due to abnormal power supply or
noise
Lockout state due to Communication
error, or error due to abnormal power
supply or noise
Muting/Override state, or Lockout state
due to DIP Switch setting error *3
Blinking
Blinking
-
F3SG-RE
Quick Installation Manual