Omron F3SG RE Series Quick Installation Manual page 20

Wiring
■
Mounting and Beam Alignment
Note: Although this chapter uses the figures of the F3SG-RA series safety light curtain, the mounting proce-
dure of the F3SG-RE series is the same as the F3SG-RA series.
1. Loosen the screws and adjust the angle.
Step1
Check
position
Step2
Mount
Step3
2. Lightely tighten the screw.
Align
beams
3. Adjust the mounting position and secure the bracket.
4. Secure the bracket to the wall.
Screws to mount the brackets to the wall are not included.
19
hexagon socket head
cap screw (M3 x 15)
hexagon socket head
cap screw (M3 x 15)
<Backside mounting>
Optical surface
of F3SG-RE
Adjustable
Bracket
<Backside mounting>
Adjust the bracket
to mounting position
<Backside mounting>
Mounting/Beam Alignment
Slide the hook
in the groove
Slide the hook
in the groove
<Side mounting>
Adjust the bracket
to mounting position
Tightening torque:
2.0 N•m (recommended)
<Side mounting>
Operation check
hook
<Side mounting>
Optical surface
of F3SG-RE
Adjusta
Bracket
Quick Installation Manual
F3SG-RE