Omron F3SG RE Series Quick Installation Manual page 18

Wiring
■
Mounting
Note: Although this chapter uses the figures of the F3SG-RA series safety light curtain, the mounting proce-
dure of the F3SG-RE series is the same as the F3SG-RA series.
1. Loosen the screw.
Step1
Check
position
Step2
Mount
2. Lightely tighten the screw.
Fixed Bracket
3. Adjust the mounting position and secure the bracket.
4. Secure the bracket to the wall.
Screws to mount the brackets to the wall are not included.
17
Mounting/Beam Alignment
Hexagon socket head
cap screw (M3 x 15)
<Backside mounting>
Optical surface
of F3SG-RE
Slide the hook
in the groove
<Backside mounting>
Adjust the bracket
to mounting position
<Backside mounting>
Fixed Bracket
hook
<Side mounting>
Optical surface
of F3SG-RE
Slide the hook
in the groove
<Side mounting>
Adjust the bracket
to mounting position
Tightening torque:
2.0 N•m (recommended)
<Side mounting>
Operation check
Fixed Bracket
F3SG-RE
Quick Installation Manual