Operation Check; Suitability For Use/Contact Information - Omron F3SG RE Series Quick Installation Manual

Wiring

11. Operation Check

After wiring, mounting and beam alignment are done, check the operation of the F3SG-RE. Attach the
included Troubleshooting Guide Sticker nearby, if necessary.
Refer to Safety Light Curtain F3SG-R Series User's Manual or the web site for troubleshooting.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product,
machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all
cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
OMRON Corporation
Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 JAPAN
Regional Headquarters
OMRON EUROPE B.V. (Representative and Importer in EU)
Wegalaan 67-69, NL-2132 JD Hoofddorp
THE NETHERLANDS
Tel: (31)-2356-81-300 / FAX: (31)-2356-81-388
OMRON SCIENTIFIC TECHNOLOGIES INC.
6550 Dumbarton Circle
Fremont, CA 94555 U.S.A.
Tel: (1) 510-608-3400 / Fax: (1) 510-744-1442
In the interest of product improvement, specifications are subject to change without notice.
21
Mounting/Beam Alignment
TROUBLESHOOTING [EN]
Blinking Once
Blinking Twice
Suitability for Use
Suitability for Use
Industrial Automation Company (Manufacturer)
For more information, visit
Blinking OFF
http://www.ia.omron.com/f3sg-r
LED INDICATOR MAJOR CAUSE
INTERNAL Error of internal circuit
LOCKOUT
ON/OFF Error of OSSD lines
LONG Error of Operating Range Select Input line
POWER Error of emitter
ON/OFF, COM, or
LOCKOUT
Error due to abnormal power supply or noise
INTERNAL
POWER Error due to noise
LOCKOUT
STB Error due to vibration or ambient light
8600128-9A(5)
http://www.ia.omron.com/f3sg-r
/Co nt a ct Inf orma t i o n
Contact: www.ia.omron.com
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011 / Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222 / Fax: (86) 21-5037-2200
Operation check
F3SG-RE
Quick Installation Manual