Note
Recommended torque on fastening screws for good seal:
• 1.1 Nm (10 lb-inch)
Note
• Recommended mounting: mount to panel, up to 5 m from the device. If alternate
mounting surface is used, it MUST be able to support four times the weight of the device.
• Fasteners included: M5 screw, seal washer, M5 flat washer and nut. These fasteners are
required to maintain IP65 rating on remote lid.
4.2.7
Remote panel mount cutout
Remote panel cutout dimensions
Note
Cutout template (printed to scale) shipped with remote panel mount option.
SITRANS LT500 with ultrasonic transducer inputs
Compact Operating Instructions, 02/2024, A5E52021877-AA
Installing/mounting
4.2 Installing/mounting the device
23