Janome JR3000 Series Operation Manual page 15

When attaching tools, a USB camera, or any other device, make sure they
are securely fitted before running the robot.
Failure to do so causes injury or breakdown.
When using the machine for extended periods of time, check and make sure
none of the main unit's mounting screws are loose, and perform a routine
inspection every 3 months or after every 750 hours of operation. Failure to do
so causes injury or breakdown.
Be sure to check the connections of the cords and cables to the main unit.
Improper connection causes unit malfunction or breakdown.
When lifting or transporting the robot, do so in accordance with the following:
• Secure the movable parts of the unit (the Z/ZR mechanism) before
transportation.
• Lift and transport the JR3200 Series with 2 or more people.
• Lift and transport the JR3300 – JR3600 Series with 2 or more people or
use a lifter.
• Hold the bottom of the base and keep the robot horizontal.
• Do not hold the robot by the column or Y body.
Failure to adhere to this can cause injury or damage the robot.
Use the unit in an environment that is not exposed to direct sunlight.
Direct sunlight causes unit malfunction or breakdown.
Individual Configuration Information varies for each individual unit even if they are
the same model. Do not use backup data with a different robot. The robot
cannot function normally with backup data from a different robot.
External Control (I/O / Fieldbus)
FOR YOUR SAFETY
Caution
14 DESKTOP ROBOT JR3000