Setting The Multi-Function Switch - Skoda Fabia III 2015 Workshop Manual

Fabia III 2015 ➤, Kamiq 2019 ➤, Karoq 2018 ➤, Karoq 2020 ➤, Octavia III 2013 ➤, ...
Automatic gearbox 09G - Edition 02.2021
– Fit washer -2- and nut -3- onto the gearshift shaft and fasten
the nut.
– Install cable lock -1-, at the same time inserting the cable
end into the locking device
page 201 .
When installing the lock, the selector lever cable is adjusted at
the same time.
– Inspect gearshift mechanism
nism", page 127 .
– Remove battery and battery tray ⇒ Electrical system; Rep.
gr. 27; Battery; Removing and installing battery tray.
Tightening torques and summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation,
as well as replacement components after removal.
♦ ⇒ o6.2 f components - Gearshift mechanism", page 119
Component
Multi-function switch -F125- to gearshift shaft
Gearbox shift lever to gearshift shaft
6.11

Setting the multi-function switch

⇒ t6.11.1 he multifunction switch, Fabia III, Octavia III, Scala,
Kamiq, Karoq", page 198
⇒ t6.11.2 he multifunction switch, Octavia IV", page 200
6.11.1 Setting the multifunction switch, Fa‐
bia III, Octavia III, Scala, Kamiq, Karoq
Special tools and workshop equipment required
198
Rep. gr.37 - Controls, housing
⇒ c6.12 able adjusting element",
⇒ t6.3 he gearshift mecha‐
Nm
7
13