Variable Loading Floor In The Luggage Compartment (Estate); Multi-Function Pocket; Class N1 Vehicles - Skoda Octavia Owner's Manual

CAUTION
The following instructions must be observed to avoid damage to the storage
■
compartments.
Do not stored any sharp objects in the storage compartments.
■
Do not place any point-pressure in the storage compartment.
■
Carefully place the items in the storage compartments.
■

Multi-function pocket

Fig. 125 Multifunction pocket: pull out/insert/push in/remove

Read and observe and
The multifunction pocket (hereinafter referred to as pocket) is provided for
storing clothing and light objects with no sharp edges.
The maximum permissible load of the multifunction box is 3 kg.
Removal and fitting
›
Fold down the front hooks on both sides of the luggage compartment in the
direction of arrow » Fig. 125.
1
›
Grasp the rear bar with both hands and withdraw the pocket in arrow di-
A
rection .
2
on page 101 first.
›
Place the rear bar onto the two hooks that are folded forward in the direc-
tion of the arrow all the way to the stop.
3
Pushing in
›
Remove the rear bar from the hook in the direction of the arrow
›
Push in the pocket in the direction of the arrow
›
Place the rear bar against the front bar and press them together at both
ends .
B
›
The front hooks on both sides of the luggage compartment fold back oppo-
site to the direction of arrow
1
Removing/inserting
 The roll-up cargo cover must be removed.
›
Remove the pocket from the fittings in the direction of the arrow
» Fig. 125.
Insertion takes place in reverse order.
›
When inserting, push the end of the bar marked   into the right receptacle
and the end of the bar marked   into the left receptacle. The arrows should
be pointing forward.

Class N1 vehicles


Read and observe and
In class N1 vehicles that are not fitted with a protective grille, a lashing set that
complies with the EN 12195 standard (1-4) must be used for fastening the load.
Proper functioning of the electrical installation is essential for safe vehicle op-
eration. It is important to ensure that the electrical installation is not damaged
during the adjustment process or when the storage area is being loaded and
unloaded.

Variable loading floor in the luggage compartment (Estate)


Introduction
This chapter contains information on the following subjects:
Positions of the variable loading floor
Fold up variable loading floor
Dividing the luggage compartment
.
5
.
on page 101 first.
Transporting and practical equipment
» Fig. 125.
4
6
108
108
109

107