Multi-Function Display (Mfd); Counter For Distance Driven; Service Interval Display; Gear Recommendation - Skoda citigo Owner's Manual

Counter for distance driven


Read and observe on page 24 first.
To toggle between the odometer and the counter for the distance travelled
(trip), briefly press the button
3
Counter for distance travelled (trip)
The counter indicates the distance you have driven since it was last reset - in
steps of 100 metres or 1/10 of a mile.
Reset counter for distance travelled (trip)
›
Press and hold the » Fig. 17
3
Odometer
The odometer indicates the total distance which the vehicle has been driven.

Service interval display


Read and observe on page 24 first.
The service interval display shows the mileage to the next service event.
Before the next service interval has been reached, the message  appears in
the instrument cluster display for some seconds and the remaining kilometres
are shown after switching on the ignition.
If the time of the service has been reached, an acoustic signal will sound and
the message  appears for a few seconds after switching on the ignition.
The information regarding the service intervals can be found in the service
schedule.
Note
Information is retained in the Service Interval Display even after the vehicle
battery is disconnected.

Gear recommendation


Read and observe on page 24 first.
An information for the engaged gear is shown in the display of the instrument
cluster.
The function of the gear recommendation is to help reduce fuel consumption.
26
Using the system
» Fig. 17 on page 24 or » Fig. 18 on page 24.
on page 24 or » Fig. 18 on page 24 button.
Show

Optimal gear engaged.

Recommendation that you shift to a higher gear.

Recommendation that you shift to a lower gear.
Recommended gear
The gear recommendation is intended only for vehicles with a manual trans-
mission or for vehicles with an automatic transmission in manual shift mode
(Tiptronic).
On vehicles with a manual transmission in the display, the recommended gear
and the respective arrow symbol is displayed.
For vehicles with automated manual transmission mode for manual shifting
(Tiptronic), the currently engaged gear and the respective arrow symbol is
shown in the display.
WARNING
The driver is always responsible for selecting the correct gear in different
driving situations, such as overtaking.
For the sake of the environment
A suitably selected gear has the following advantages.
It helps to reduce fuel consumption.
■
It reduces the operating noise.
■
It protects the environment.
■
It benefits the durability and reliability of the engine.
■

Multi-function display (MFD)


Introduction
This chapter contains information on the following subjects:
Operation
Memory
Multifunction display details
Warning at excessive speeds
Importance
27
27
28
29
29
