Multi-Function Display (Mfd) - Skoda Citigo Owner's Manual

The arrow symbol is shown after the name of the engaged gear.
- Recommends that you change up to a higher gear

- Recommends that you change down to a lower gear

Gear recommendation - vehicles with manual transmission
The recommended gear and the arrow icon is displayed.
If e.g.   appears, this means it would be beneficial to change up from a lower
gear into 3rd gear.
Gear recommendation - vehicles with automated manual transmission mode
for manual gearshifting (Tiptronic)
The currently engaged gear and the relevant arrow icon is displayed.
If .g   appears, this means it would be beneficial to change up from 3rd gear
to a higher gear
WARNING
The driver is always responsible for selecting the correct gear in different
driving situations, such as overtaking.

Multi-function display (MFD)


Introduction
This chapter contains information on the following subjects:
Operation
Multifunction display details
Warning at excessive speeds
Memory
The driving data is displayed on the multifunction display.
The multifunction display only operates if the ignition is switched on. After the
ignition is switched on, the function that was last selected before switching
off the ignition is displayed.
WARNING
Concentrate fully at all times on your driving! As the driver you are fully
■
responsible for the operation of your vehicle.
Even at temperatures of around +4 °C, black ice may still be on the road
■
surface! You should therefore not only rely on the outside temperature dis-
play for accurate information as to whether there is ice on the road.
Operation

Read and observe on page 31 first.
Some features of the multi-function display can be operated with the buttons
on the control lever » Fig.
Operation description
Button Action
31
31
Briefly push up or down
A
32
Press briefly
B
33
Press and hold button
33
Multifunction display details

Read and observe on page 31 first.
Overview of driving data (depending on the vehicle equipment).
Clock
The current time is displayed.
Fig. 24
Buttons on the control lever
24.
Operation
Select data / set data values
View information / confirm specification
Reset memory
Instruments and control lights

31