Inspecting The Gearshift Mechanism - Skoda Fabia III 2015 Workshop Manual

Fabia III 2015 ➤, Kamiq 2019 ➤, Karoq 2018 ➤, Karoq 2020 ➤, Octavia III 2013 ➤, ...
❑ Removing and installing
6.3

Inspecting the gearshift mechanism

⇒ s6.3.1 elector mechanism, Fabia III, Octavia III, Scala, Kamiq,
Karoq", page 127
⇒ s6.3.2 hift mechanism, Octavia IV", page 128
6.3.1 Check selector mechanism, Fabia III,
Octavia III, Scala, Kamiq, Karoq
• In selector lever positions "S", "D", "R" and Tiptronic position
it must not be possible to activate the starter.
• At speeds above 5 km/h and shifting in selector lever posi‐
tion "N", the selector lever lock solenoid must not engage
and block the selector lever. Selector lever can be shifted in
a driving position.
• At speeds below 5 km/h (virtual standstill) and shifting in
selector lever position "N", the selector lever lock solenoid
must only engage after approx. 1 s. The selector lever can
only be moved from position "N" by activating the brake
pedal.
Selector lever in position "P", button on selector lever pressed
and ignition switched on
• Brake pedal is not operated.
The selector lever is locked when the button is pressed and
cannot be shifted out of position "P". The selector lever lock
solenoid blocks the selector lever.
• Brake pedal is operated.
The selector lever lock solenoid releases the selector lever. It
is possible to engage a driving gear position. Slowly shift selec‐
tor lever from "P" through "R, N, D, S"; while doing so check
whether the selector lever position in the dash panel insert cor‐
responds with the actual selector lever position.
Selector lever in position "N", button on selector lever pressed
and ignition switched on
• Brake pedal is not operated.
The selector lever is locked and cannot be moved out of posi‐
tion "N". The selector lever lock solenoid blocks the selector
lever.
• Brake pedal is operated.
The selector lever lock solenoid releases the selector lever. It is
possible to engage a driving gear position.
Note
Shifting out of the position "N" to "D" by activating the brake
pedal is also possible without pressing the button on the selec‐
tor lever. From position "N" to "R" the button on the selector
lever also must be pressed.
Selector lever in position "D", ignition switched on
• Guide selector lever in the Tiptronic gear.
The light for "D" on the lamp for selector lever scale illumination
-L101- must go out and the "+" and "–" symbols should light up.
⇒ c6.12 able adjusting element", page 201
Automatic gearbox 09G - Edition 02.2021
127
6. Shift mechanism