User Manual for ALP442e & ALP442e-MIC
7.2 Updating the driver version
If a driver version for the ALP card has already been installed, and you want to install another version,
first uninstall the current driver version (see chapter
then install the new version by double clicking on the driver installation file "ALP-X Kit vxx.exe" (see
the detailed procedure in the hereinabove chapter
7.3 Updating the firmware
The ALP card on-board firmware may have to be upgraded, and updates can be supplied by Digigram
and prove necessary.
Updating the firmware can be done from the ALP-X Manager GUI (see chapter
procedure).
-
ALP882e & ALP882e-MIC
,
"Uninstalling the driver under
"Very first
settings. There is no need to install it if
no application reliant on the ASIO
interface is used.
The driver is installed by default in the folder
"C:\Program Files (x86)\Digigram\ALP-X".
To change this folder, click on Browse and
select a new destination.
Click on Install to continue with the
installation.
The driver and selected components are
being installed.
installation").
Windows"), and
Firmware update
16