Table of Contents
Advertisement
User Manual – ALP222e & ALP222e-Mic
7.2 Updating the driver version
If a driver version for the ALP card has already been installed, and you want to install another
version, first uninstall the current driver version (see chapter
Windows"), and then install the new version by double clicking on the driver installation file "ALP-X
Kit vxx.exe" (see the detailed procedure in the hereinabove chapter
7.3 Updating the firmware
The ALP card on-board firmware may have to be upgraded, and updates can be supplied by
Digigram and prove necessary.
Updating the firmware can be done from the ALP-X Manager GUI (see chapter
procedure").
7.4 Verifying the card installation
Once the driver and card have been installed as per the process described hereinabove, you can
verify that the card is installed correctly and working properly.
7.4.1 Presence of playback and recording devices
The audio devices exposed by the card driver are visible on the Windows Sound panel. To open it,
right click on the loudspeaker icon in the Windows taskbar and select "Sounds":
The audio devices exposed by the ALP driver are visible from the "Play" and "Record" tabs.
"Uninstalling the driver under
"Very first
installation").
"Firmware update
.
15
Advertisement
Table of Contents
