MAINTENANCE AND SAFETY CHECKS
To be performed once per year or between patient placements.
Electronics
Check all controls to make sure all functions work properly.
• Power cord
• Pendant cord
• Check to make sure all wires are routed and attached properly so they do not
interfere with any moving parts
• Check to make sure all plugs are fully inserted or attached
Bed Frame and Sleeping Surface
Visually check all welds
• Head section
• Knee section
• Main Frame
• Check joints between sleeping surface sections for loose fasteners
Cleaning
The metal parts of the bed are covered with a baked epoxy coating. Clean all
coated parts with mild detergent and warm water. Periodically raise head and
feet sections of the bed and remove dust from frame. Also, periodically remove
the mattress and clean mattress deck.
Lubrication and Mechanical
• Lightly grease all actuator screw threads with white lithium grease
• Lubricate all caster roller and swivel bearings with light machine oil
• Check all bolts and tighten as needed
WARRANTY
• Limited lifetime on frame
• 2 Years on Motor
18
User Manual & Entrapment Guide