Installing Drive Shaft Full-Electric Bed; Height Adjustment-Pin Installation (Full & Semi Electric Beds) - Proactive Protekt Akra PMSEBHR User Manual & Entrapment Manual

Installing Drive Shaft
1. Take 1 drive shaft and connect 1 end to the headboard gear box as pictured
in figures 1, 2, and 3.
Figure 1
2. Take 1 drive shaft and connect 1 end to the footboard gear box as pictured in
above figures 1, 2, and 3.
Optional Height Adjustment
(Full & Semi Electric Beds)
● Insert lock pin through adjustment hole. (1" increments)
NOTE: If lock pin cannot insert through the holes easily, rotate the crank handle
(clockwise or counter-clockwise) until the lock pin goes through. (Fig. 2)
● Secure lock pin with safety pin provided. (Fig. 3)
● Repeat on each remaining leg.
User Manual & Entrapment Guide
Full-Electric Bed
Figure 2
Pin Installation
Figure 3
15