5. Full-Electric Bed Only - Insert the adapter into the clip.
1. With the motor oriented properly underneath the bed (head to head, foot to
foot), align the motor with actuator bar and lift the head spring to the highest
position. The motor will automatically be pulled towards the bed and lock
onto the actuator.
2. Once the head side of the motor is attached to the head section of the bed,
return the head section to the flat position.
3. Once flat, attach slide caps to the head section of the motor and slide it into
place. Repeat for foot section.
4. Completed Assembly.
User Manual & Entrapment Guide
Aligning and Mounting the Motor
13