UpDown Desk PRO Series Install Manual page 8

14
We will now attach the Feet (c) to the ends of the legs.
Using 4 of the M8 x 20mm screws, install the Feet by
loosely tightening the screws.
Once all 4 screws are in, then tighten them off with the
large Allen Key.
Repeat for the other foot.
15
Once the frame has been installed you can grab the Control Box (f). The Control Box
features the following plugs:
Connection Motor Cable Port
Control Panel Port
Connection Motor
Cable Port
Connection Motor Cable Port
Power Cable Port
Control Panel
Port
M8 x 20mm
Connection Motor
Cable Port
Power Cable
Port
08