UpDown Desk PRO Series Install Manual page 4

05
Take the 2x Sliding Rails (d), and loosen off every grub screw using the Allen Key.
There is no need to remove the grub screw completely.
Dismantle into individual components.
Outer Tubes
Inner Rails
06
You will need the following
parts for this step:
1x Leg (a)
1x Wing (b)
2x outer tubes from the same
side of the Sliding Rail that you
just dismantled in above step
6x M8 x 10mm screws
large Allen Key
M8 x 10mm
04