UpDown Desk PRO Series Install Manual page 10

18
Choosing which side you want your
Control Panel (e), plug it into the
Control Box (f) and align the Control
Panel with the edge of the desk.
THIS STEP MAY BE EASIER IF YOU
SCREW THE CONTROL PANEL TO THE
POINT YOU CAN STILL SLIDE ENOUGH
SO IT WILL STAY IN PLACE, BUT LOOSE
ENOUGH THAT YOU CAN MOVE IT
BACK AND FORTH - WE RECOMMEND
THIS BECAUSE IT IS EASIER TO ALIGN
THE CONTROL PANEL WITH THE EDGE
OF THE DESK ONCE IT HAS BEEN
19
After completing these two steps, using the 3M cable clips provided, you can gather and
pin back the excess cables to tidy the underside of the desk.
20
AT THIS POINT WE RECOMMEND INSTALLING ANY OF THE FOLLOWING ACCESSORIES
YOU PURCHASED: CABLE TRAY, CASTOR WHEELS, METAL DRAWER.
Self Tapping
3M cable clip
10