UpDown Desk PRO Series Install Manual page 13

This control panel has a number of function setting capabilities to customize the display and
operation of the desk:
Setting a Min/Max Height - If you have an obstruction in the area that you are looking to
place your desk, such as drawers or CPU underneath, or a window or shelf above the desk.
Min Height - This can be done for any height below 96cms
Max Height - This can be done for any height above 96 cms.
Using the Arrow Buttons - get the desk to the desired height.
Press and hold both Arrow Buttons for 5 seconds until you hear a beep.
This indicates that the desired height has been set.
Remove Max Height
Using the Arrow Buttons - take the desk to the current Max Height.
Press and hold both Arrow Buttons for 5 seconds until you hear a beep.
This indicates that the Max Height has been removed.
Locking the Control Panel - preventing the use of any button function until unlocked
Lock - Press 'Up' arrow and 'M4' button for 5 seconds.
Screen will display - 'LOC'
Unlock - Press "Down' arrow and 'M4' button for 5 seconds.
Screen will display height - function is returned.
Furthermore you can access a menu of functions that you can change. To access this list:
Press and hold the 'M4' button. You will need to hold it past the first beep and until the
second beep happens (approx 10 seconds)
The screen will display S-1
Using the Arrow Buttons, you can cycle through the following functions:
S-1 - Unit displayed change - Cms / Inches.
S-2 - This is a blank function for future updates.
S-3 - Up Anticollision Sensitivity.
S-4 - Down Anticollision Sensitivity
.
S-5 - Basement Height.
There are a number of other functions that you might see. We recommend not
changing these, as they are factory set.
ADVANCED FUNCTION SETTINGS
13