UpDown Desk PRO Series Install Manual page 7

12
Line up the threaded insert holes and fasten this leg into the desktop with the remaining
M6 x 12mm screws and smaller Allen Key.
PLEASE ENSURE THAT YOU ALIGN THE INNER RAIL IN A CENTRAL POSITION, THIS CAN BE
DETERMINED BY ALIGNING THE MIDPOINT OF THE SLIDING RAIL WITH THE MIDDLE OF THE
DESKTOP.
13
You can now tighten the following screws:
8x grub screws on the Sliding Rails (d) with the larger Allen Key. Please note that if you
have a 180cm desktop, only the 4x inner grub screws will tighten.
8x screws that are fixing the frame to the desktop using the smaller Allen Key.
Mid Point of
Inner Rails
M6 x 12mm
07