Table of Contents
Advertisement
12.2
Removing and reattaching the side cladding
The chassis cladding can be removed for maintenance, repair or clean-
ing.
Take the following steps in the following sequence when removing and
reattaching the side cladding:
>
Loosen and remove knurled screws .
>
Remove rear cladding.
)
See Section "12.1 Removing and reattaching the chassis clad-
ding"
>
Raise the side cladding at rear.
>
Disconnect the cable for the front headlight and directional indica-
tor at the connection.
>
Remove side cladding from the front.
>
Reassemble in the opposite sequence.
L
Make sure the plastic washers are present, as they protect the
chassis components from damage.
56
Fig. 23: Side cladding
Fig. 24: Front headlight, cable
Removing and reattaching the chassis cladding
Advertisement
Table of Contents
