Paravan PR heavy duty User Manual page 115

Error message
Brake Error/Bremsen
Motor Error/Motorfehler
Gone to sleep/Ruhemodus
Gyro disconnected/Gyro ni.
angeschl
Bad Cable/Kabelfehler
Troubleshooting
Meaning & recommended action
Brake fault This text is displayed when the control system detects a problem with the
magnetic brakes or their connections.
Check the magnetic brakes, cables and connections of the control system.
Check that the motor brakes are not disengaged.
This text is displayed when the control system detects that the connection to a motor
has been broken.
Check the motors, cables and connections of the control system.
This text is displayed when the control system is inactive for a longer time than set via
the „SleepTimer" parameter.
This text is displayed when the control system detects that the gyro module is no
longer connected.
Connect the gyro module and restart the system.
This text is displayed when the control system detects an error in the wiring of the
communication lines between the modules.
Check to see if any cables or connections are broken or crushed/clamped.
If there is any visible damage to the cables, replace the cables and turn the control sys-
tem off and on again. Contact your customer service representative for replacement.
115