Table of Contents
Advertisement
15.9.4
Securing the wheelchair in the docking station
>
Maneuver the wheelchair slowly and in a uniform direction over the docking station. The lock plate under
the wheelchair helps to guide the wheelchair into place in the docking station. When the lock plate is fully
engaged in the docking station, a spring-action locking pin automatically secures the lock plate.
>
The docking station is equipped with a control switch that indicates whether the lock plate is correctly se-
cured in the docking station. As soon as the lock plate comes into contact with the locking pin, a warning
tone will sound (a high-pitched howl), and the red diode/lamp (LED) in the control panel will light up until
the lock plate is either fully engaged or else the wheelchair is removed from the docking station.
>
As an indication that the wheelchair is properly secured, the warning tone will cease, the red lamp (LED) in
the control panel will go out and the green lamp (LED) will light up.
>
Do not forget to buckle up for driving.
)
Please refer to Dahl Engineerings installation and user guide for height
adjustable VarioDock™ system.
Loading and transporting your electric wheelchair
89
Advertisement
Table of Contents
